Ti ClTi Clad Copper Bars With Material Gr1 Or Gr2 And Copper T2 Or TU2AD Copper Bars With Material Gr1 Or Gr2 And Copper T2 Or TU2

- Aug 03, 2017 -

Titanium copper composite rod, also known as titanium copper, copper rod is coated with a certain thickness of the titanium layer, the main components of the metal anode. It combines the excellent conductivity of copper and the excellent corrosion resistance of titanium. It is mainly used in electrolysis, electroplating, hydrometallurgical and metal anodic electrolytic cells under strong corrosion conditions. Material excellent electrical conductivity, on the other hand to play the coating material corrosion resistance, is a high quality electrode material. I produced the composite rod composite strength of 135Mpa, tensile shear strength of 180-260Mpa, with good electrical conductivity, composite rod micro-resistance of 7.77 × 10-6Ω, can significantly reduce the electrolyte, plating solution pollution, saving energy , To improve the environment for energy conservation and environmental protection electrode materials. And according to user requirements to produce different specifications of the round, drum, square, flat and other composite rods, but also for different shapes of bending and welding. Titanium-copper composite bar performance: titanium copper composite rod as a metal anode of the main components, the role of the following three points: First: support the anode; titanium copper composite rod has a certain strength and bending resistance, composite bar yield strength 128MPa, fully meet the production design requirements. Two: excellent conductivity; the use of explosion + rolling production process so that titanium can be completely close composite, does not produce delamination and therefore has good electrical conductivity, composite strength of 135Mpa, and micro resistance of 7.77 × 10-6Ω. Three: corrosion resistance, titanium copper composite bar directly with the outer layer of contact with the electrolyte, the outer layer of titanium has excellent corrosion resistance (see table), its life than other materials electrode 10 times longer. (T2), oxygen-free copper (TU2), aluminum (AL), such as the shape and specifications of the end of the surface: GB / T12769-2003 cladding materials: titanium Ti, nickel Ni, zirconium Zr, stainless steel (316L) (10 ~ 40) Square: (2 ~ 80) × (0.5 ~ 3.0) Drum: φ (25,27,29,32,34) × 14 × (1.0 ~ 2.0) Square: (10 ~ 100) width (10 ~ 30) fillet transition R (3 ~ 5) titanium copper composite copper chemical composition should meet the GB / T5231 the corresponding grades, titanium chemical composition should meet the GB / T15073 or GB / T3620 the corresponding grade requirements. Titanium-copper composite bar inspection using ultrasonic flaw detection