Cathode assembly
Busbar made of stainless-steel 316L/304 and copper C11000(from outside to inside) or busbar made of stainless steel 316L/304 and copper and carbon steel(from outside to inside)
Normal size: 25mm*38mm*1350mmL or built to order
Cathode Sheet: Stainless Steel AISI 316-L or LDX2101
Normal Size: 3mm/3.25mm*1048mm*1238mm or built to order
Tolerance as follows,
Flatness tolerance: 2.0mm when sheet is hung from top edge.
Camber tolerance: 1.0mm.
Parallel tolerance: 1.0mm wide, datum opposite edge.
Squareness tolerance: diagonal dimensions to be within 1.5mm of each side.
Sheet finish: both sides 2B cold-rolled and annealed.
Surface roughness: 0.25 to 0.60 Ra in accordance within ISO/R1302, sheet to be free from burrs and sharp edges.
0.2% proof strength(yield) of the material shall be less than 310 Mpa.